TOA VM-2240 PA Mixing amplifiers : Buy Megaphone : Electronics Megaphones, Loud-hailers and megaphones for public address, announcements, auctions, outdoor events, tour guides, sports meetings.

TOA VM-2240 System Management Amplifier

TOA VM-2120 120W System Management Amplifier £608.29
TOA VM-2240 240W System Management Amplifier £666.63
*(Plus Carriage & VAT)*

Features

Taking advantage of TOA's long-accumulated technological expertise and knowledge in security and audio, the VM-2000 Series is part of a select range of sound management equipment.

Featuring outstanding audio performance, this range of equipment satisfies the growing need for reliable and efficient communications for various applications including office buildings, schools, shopping malls, supermarkets, factories, hospitals and transportation terminals.

Targeted at medium-sized facilities, every VM-2000 Series unit offers three line/mic inputs, 2 BGM inputs and remote mic capability as well as telephone paging.All controls and indicators are laid out in a logical, easy-to-see manner that aids operation. Tonal preferences may be set for each channel in order to optimize it to sound the best for speech or music signals. The processed input signals can then be sent on to any of five independent loudspeaker zones as desired, or automatically to all in the case of an emergency. Operation is simple and trouble-free for site staff. And the VM-2000 Series' clean, attractive design makes it well-suited for installation in a
building's operation center equipment rack or even on a table or desk in a reception area.

Specifications

Power Requirement	AC mains, 50/60 Hz DC: 24 V
Output	VM-2120 = 120 W, VM-2240 = 240 W
Frequency Response	50 - 16,000 Hz
Distortion	Less than 1%
Signal-to-Noise Ratio	More than 60 dB
Tone Control	Bass: 100 Hz ±10 dB, Treble: 10 kHz ±10 dB (Inputs 1 - 3 and BGM individually adjustable.)
Remote Microphone/Extension Amplifier Connection	Two RJ45 female connectors Maximum distance: 800 m
Audio Input
Inputs 1 ~ 3	-60 dB1 [MIC]/-10 dB1 [LINE] (switchable), 600 Ω, electronically balanced2, combined XLR type connector (female)/ 1/4" phone jack (Only Input 1 is additionally (female)/ 1/4" phone jack (Only Input 1 is additionally equipped with DIN connector3.)
Telephone Paging Input	Push-in terminal block -10 dB1, 10 k Ω, electronically-balanced2 Control : No-voltage make contact input
BGM 1 - 2	-20 dB*1, 10 k Ω, RCA pin jack, monaural
Power Amplifier Input	0 dB*1, 10 k Ω, RCA pin jack
External Speaker Line Input	100 V line, for All-Zone Broadcast
Audio Output
Speaker Output	41 Ω (100 V line, volume control in maximum position), Removable terminal block with screw terminals.
Speaker Zone Control	5-zone selector with attenuator
Direct Speaker Line Output	Direct output from the power amplifier output transformer,
Line Output	0 dB*1, 10 k Ω, RCA pin jack
Recording Output	0 dB*1, 10 k Ω, RCA pin jack
Preamplifier Output	0 dB*1, 10 k Ω, RCA pin jack
Control Inputs 1 - 3	For controlling Inputs 1 - 3, Push-in terminal block No-voltage make contact.
Control Input and Output	Control Input and Output Input : No-voltage make contact input Output : Open collector output (1) External control input Activation of messages for an optional Voice Announcement Board*4 Activation of power Activation and stop of Emergency Broadcast Unit's broadcast cutoff (when activated by an external emergency equipment) (2) Status output Irregularity of communications with the Remote Microphone and an expansion amplifier AC power condition DC power condition Irregularity of the sound source of the Voice Announcement board Stop of the unit's broadcast
External Attenuator Control Output	Removable terminal block with screw terminals, relay, no-voltage make contact output, transfer type
Surveillance Input and Output*5	25-pin female D-sub connector Input : No-voltage make contact input Output : Open collector output
Power Output	24 V DC
Chime Tone	Built-in chime: 2-tone chime/2-tone chime(fast repeat) 4-tone chime (Up)/Single-tone chime/4-tone chime (Up & Down)/Gong/off
Finish	Panel: ABS resin Case: Steel plate painted
Dimensions	419 (W) × 143.3 (H) × 356.2 (D) mm
Notes	1 0 dB = 1 V 2 Can be transformer-balanced with the addition of an optional IT-450 input transformer. 3 For connection of the Paging Microphone with remote control switch. 4 An optional EV-200 Voice Announcement Board is required. *5 An optional SV-200M Surveillance Board is required.